Kyocera FS-2000D User Manual

Using the Operation Panel
2-34 ADVANCED OPERATION GUIDE
6
Press B. One of the following menus is indicated. To change settings for
the item, press [OK]. Use ? or @ to change the value or selection.
7
Activate the appropriate protocol that is required to connect the printer to
the network. To activate a protocol, display the protocol, press [OK], press
? or @ to change from Off to On, and press [OK].
8
Press [Menu]. The display returns to Ready. You can print a network
status page to confirm that the IP address, subnet mask address, and the
gateway address have been properly set. To print a network status page,
refer to Printing a Network Interface Status Page on page 2-36.
Resolving IP Address
To connect the printer to the network using TCP/IP protocol, you must set
the IP address on the printer. The IP address must be unique to the printer
and should be obtained from your network administrator.
1
Activate TCP/IP protocol in the manner
described above.
Set this item to On when you connect to a
network using NetWare. In submenu (>),
frame mode can be selected from Auto,
802.3, Ethernet II, 802.2, and
SNAP.
>NetWare >
On
Set this item to On when you connect to a
network using TCP/IP. Submenu (>) has
items including DHCP, BOOTP, IP
address, subnet mask address, and
gateway address. To resolve IP address
for the network card, refer to Resolving IP
Address on page 2-34.
>TCP/IP >
On
AppleTalk must be activated (On) for
networking with Macintosh computers.
>AppleTalk
Off
When the item is set to On, the printer
prints out a network status page when it
prints the printer status. refer to Printing a
Network Interface Status Page on page
2-36.
>Network Status
Page Off
>TCP/IP >
On

Kyocera FS-2000D Specifications

General

Color	No
Duplex printing	Yes
Print technology	Laser
Maximum resolution	1200 x 1200 DPI
Time to first page (black, normal)	9 s
Print speed (black, normal quality, A4/US Letter)	30 ppm
Internal memory	64 MB
Maximum internal memory	576 MB
Total input capacity	500 sheets
Total output capacity	250 sheets
Maximum input capacity	1100 sheets
Media weight (tray 1)	60-120 gsm
Non-ISO print media sizes	Letter
ISO A-series sizes (A0...A9)	A4, A5
ISO B-series sizes (B0...B9)	B5
Maximum ISO A-series paper size	A4
Custom media sizes	148 x 210 mm - 216 x 356 mm
Power requirements	220 - 240 V
Networking features	Ethernet/Fast-Ethernet
Maximum duty cycle	150000 pages per month
Sustainability certificates	ENERGY STAR
Power consumption (standby)	9 W
Power consumption (printing)	400 W
Power consumption (PowerSave)	4 W
Certification	TÜV/GS, CE, PTS

Weight and Dimensions

Dimensions (WxDxH)	382 x 394 x 285 mm