Kyocera FS-2000D User Manual

Using the Operation Panel
2-66 ADVANCED OPERATION GUIDE
ISO B5
A4
Executive
7
When the desired paper size is displayed, press [OK]. The paper size is
set for the MP tray.
8
To exit the menu selection, press [Menu].
Setting the MP Tray Paper Type
By setting a paper type (plain, recycled, etc.) for the MP tray, you can
select the paper on the MP tray according to the paper type you command
on the printer driver. The default setting is plain paper.
For more information about paper types that can be fed from the MP tray,
refer to Paper Availability on page 1-2.
1
Press [Menu].
2
Press ? or @ repeatedly until Paper
Handling > appears.
3
Press B.
4
Press ? or @ repeatedly until >MP Tray
Type appears.
5
To change paper type, press [OK]. A
blinking question mark (?) appears.
6
Press ? or @ to display the desired paper type. The message display
toggles through the following paper types:
Plain
Transparency
Preprinted
Labels
Bond
Recycled
Vellum
Rough
Letterhead
Color
Prepunched
Envelope
Cardstock
Thick
Paper Handling >
>MP Tray Type
Plain
>MP Tray Type
? Plain

Kyocera FS-2000D Specifications

General

Color	No
Duplex printing	Yes
Print technology	Laser
Maximum resolution	1200 x 1200 DPI
Time to first page (black, normal)	9 s
Print speed (black, normal quality, A4/US Letter)	30 ppm
Internal memory	64 MB
Maximum internal memory	576 MB
Total input capacity	500 sheets
Total output capacity	250 sheets
Maximum input capacity	1100 sheets
Media weight (tray 1)	60-120 gsm
Non-ISO print media sizes	Letter
ISO A-series sizes (A0...A9)	A4, A5
ISO B-series sizes (B0...B9)	B5
Maximum ISO A-series paper size	A4
Custom media sizes	148 x 210 mm - 216 x 356 mm
Power requirements	220 - 240 V
Networking features	Ethernet/Fast-Ethernet
Maximum duty cycle	150000 pages per month
Sustainability certificates	ENERGY STAR
Power consumption (standby)	9 W
Power consumption (printing)	400 W
Power consumption (PowerSave)	4 W
Certification	TÜV/GS, CE, PTS

Weight and Dimensions

Dimensions (WxDxH)	382 x 394 x 285 mm