Kyocera FS-2000D User Manual

Using the Operation Panel
ADVANCED OPERATION GUIDE 2-11
Using the Menu Selection System
Menu Selection System
This section explains how to use the menu selection system. [Menu] on
the operation panel allows you to use the menu to configure the printer
settings to your specific needs. Settings can be made when Ready is
indicated on the printer message display.
NOTE: Settings that are received from application software and the
printer driver will take priority over settings made in the operation panel.
Entering the Mode Selection Menu
Press [Menu] when Ready is indicated on the printer message display.
The mode selection menu is displayed.
Selecting a Menu
The mode selection menu is hierarchical. Press ? or @ to display the
desired menu.
If the selected menu has a sub-menu, > is displayed after the menu.
Press B to move to the sub-menu or A to go back.
Paper Handling >
Indicates that there is a sub-menu

Kyocera FS-2000D Specifications

General

Color	No
Duplex printing	Yes
Print technology	Laser
Maximum resolution	1200 x 1200 DPI
Time to first page (black, normal)	9 s
Print speed (black, normal quality, A4/US Letter)	30 ppm
Internal memory	64 MB
Maximum internal memory	576 MB
Total input capacity	500 sheets
Total output capacity	250 sheets
Maximum input capacity	1100 sheets
Media weight (tray 1)	60-120 gsm
Non-ISO print media sizes	Letter
ISO A-series sizes (A0...A9)	A4, A5
ISO B-series sizes (B0...B9)	B5
Maximum ISO A-series paper size	A4
Custom media sizes	148 x 210 mm - 216 x 356 mm
Power requirements	220 - 240 V
Networking features	Ethernet/Fast-Ethernet
Maximum duty cycle	150000 pages per month
Sustainability certificates	ENERGY STAR
Power consumption (standby)	9 W
Power consumption (printing)	400 W
Power consumption (PowerSave)	4 W
Certification	TÜV/GS, CE, PTS

Weight and Dimensions

Dimensions (WxDxH)	382 x 394 x 285 mm