Job
User Guide 8-10
Job Storage
The Job storage feature saves jobs on the hard disk for future printing, even if the
printing system is switched off. You can also use access codes to restrict the printing
of forms.
1
In the Job tab, click Job storage (e-MPS) and then select Job Storage. 1
2
Select the Access code check box and type in the desired four-digit access code.
When you want to print the saved jobs, type in the access code on the printing
system’s operation panel. 2
3
You can name the job for future reference when printing from the printing system’s
operation panel. 3
• If you select Application defined in the Job name box, the application
automatically names the document.
• To give it a name you create, in Job name, select Custom and type in the name
of your choice. The name can be up to 31 characters in length.
4
Click OK. When you select print, the job is saved to the hard disk without printing. 4
Print Jobs Saved Using Job Storage
To print forms and other documents saved using Job Storage, follow the same steps
as for Print Private Print Jobs on page 8-9.
The stored jobs remain saved even after the printing system is switched off. To delete
them manually, follow the same steps as for Delete Quick Copy Jobs on page 8-8.
When deleting jobs, you must type in the same access code as saved in the Job
storage procedure.
To Next Page
Loading...
Need help?
General