Glossary - 1 KX Driver
Glossary
A
Access code A four-digit code you must enter at the printing system’s operation panel to
print a Private Print job. An access code can also be used with the Job storage feature.
Auto Configure Device settings feature that queries a printing system through the
network and automatically retrieves settings for optional devices, and memory. Driver
settings will be updated with information received from the physical printing system. Installed
devices will be displayed in the Preview image.
B
Booklet Layout mode that prints a multi-page document in a booklet format by using a
duplex unit. Two pages are printed on each side of a sheet to create a document that can be
read like a book.
C
Cassette Input paper tray.
Custom box Job option that stores print jobs in the printing system’s memory for later
printing from the operation panel. Custom box jobs are saved to boxes that are assigned to
users, and can be restricted by password. Your printing system must have an installed hard
disk to use this feature. 100 Custom boxes are set up on the printing system’s hard disk at
installation. The maximum number of Custom boxes is 1000.
D
dpi Dots per inch.
Duplex unit Accessory that supports two-sided document printing.
E
EcoPrint Printing mode that changes toner saturation, making the entire image, text and
graphics, appear lighter in the printed job. The actual amount of toner used depends on the
printing system mode and, the type of data printed (text, graphics, or both). EcoPrint does not
increase print speed.
e-MPS Job storage that lets you store print jobs in the standard Hard disk so that you can
access and print the job again later from the printing system’s operation panel.
F
Fast printing Printing mode that decreases spool size and increases print speed.
Finisher Optional device for stapling, folding, punching, or sorting print jobs.
G
GDI compatible mode A page description language option that accurately reproduces
what is viewed on the screen using the Microsoft Graphical Device Interface (GDI)
component to render the document. It generates data in a raster printing format, creating a
larger printable file.
Gutter Blank space on the left side or top of a printed page that can be increased by scaling
down text and graphics. This supports stapling and hole punching. When used with Duplex
printing, the enlarged blank space lines up evenly on both sides of the sheet. The larger blank
space is created by shifting the printable area to the right or down as much as one inch (25.4
mm).
To Next Page
Loading...
Need help?
General