Page 3-105
TWAIN source
The TWAIN source utility is used for controlling the scanning operation with a TWAIN-compatible application
and having that scanned image displayed in that application. This section of this Operation Guide contains
explanations on using a TWAIN-compatible application for scanning purposes.
IMPORTANT! In order to use this method of scanning, the TWAIN source must be installed in the
corresponding computer. If there are going to be multiple computers using this
capability, the TWAIN source should be installed in each of those computers.
Scanner
Perform the desired settings
for the TWAIN mode.
Set the original.
Select the Size of the Original
and Desired Resolution
in the TWAIN Source.
1
3
4
2
5
Select the Scanner from the
TWAIN-Compatible Application.
6
7
Scanning Request
Scanned Image Data
Transmission
Display of
the Scanned Image
Computer
TWAIN Source
To Next Page
Loading...
Need help?
General
