Kyocera KM-1650 User Manual

Page 1-25
Using the Scanner Function
3. To stop compression in cases when the volume of the compressed data will end up being greater that
the original data, touch the “On” key. To have compression carried out regardless of the data volume,
touch the “Off” key. Touch the “Close” key to register the change to that setting.
* The factory default setting is “On”.
* Some application software does not allow the use of compressed and non-compressed files in the same
folder. Select “Off” for this setting when using such software.

Kyocera KM-1650 Specifications

General

Print Technology	Laser
Print Speed	16 ppm
Max Resolution	600 x 600 dpi
Paper Capacity	300 sheets
Memory	32 MB
Functions	Print, Copy, Scan
Type	Monochrome
Grayscale Half-Tones	256 levels
Max Document Enlargement	200%
Max Document Reduction	50%
Output Trays Capacity	250 sheets
Monthly Duty Cycle	15, 000 pages
Scan Type	Flatbed
First Copy Out Time B/W	5.9 seconds
Supported Media Type	Plain paper
Max Media Capacity	1, 300 sheets
Interface	USB 2.0
Original Size	A3 (11.7 in x 16.5 in) (max)