Kyocera KM-1650 User Manual

Page 2-26
System Setting
• SMTP Authentication
Enter Login Account Name to use for User’s SMTP Authentication.
In order to set the SMTP Authentication for each user, the setting for SMTP Authentication must be
performed under System Basic setting in advance. (Refer to page 2-17)
• Change Password
If you want to change the User’s SMTP Authentication password, select Yes. If you do NOT want to
change it, select No.
• New Password
If you want to change the password to use for Use’s SMTP Authentication, type a new password into this
field (up to 8 characters).
• Confirm new password
Type the same password as you did in the New Password field in here.
* This procedure is necessary in order to ensure that the password was entered correctly.
• Registration button
Click on this button to have all the selected settings registered in the scanner. If you move to the next page
without clicking on the Registration button, any settings that have not been properly registered will be
deleted.
• Reset button
Click on this button to return all of the settings back to their factory default values.
• Delete button
Click on this button to delete the displayed user.

Kyocera KM-1650 Specifications

General

Print Technology	Laser
Print Speed	16 ppm
Max Resolution	600 x 600 dpi
Paper Capacity	300 sheets
Memory	32 MB
Functions	Print, Copy, Scan
Type	Monochrome
Grayscale Half-Tones	256 levels
Max Document Enlargement	200%
Max Document Reduction	50%
Output Trays Capacity	250 sheets
Monthly Duty Cycle	15, 000 pages
Scan Type	Flatbed
First Copy Out Time B/W	5.9 seconds
Supported Media Type	Plain paper
Max Media Capacity	1, 300 sheets
Interface	USB 2.0
Original Size	A3 (11.7 in x 16.5 in) (max)