Job Accounting
OPERATION GUIDE 6-3
6
Job Accounting Operation Procedures
Follow the procedures listed below to operate Job Accounting.
1 Press the Exposure Adjustment keys on both sides
for 3 seconds while pressing the Logout key.
Job Accounting: will be displayed.
2 Press or to select each of the mode
displays.
NOTE: Refer to each of the following setting
procedures and make the settings.
Each of the Modes can be selected by pressing the
numeric keys.
3 After completing each setting, press or to
select 00.Set Completed, and then press the
OK key.
To Next Page
Loading...
Need help?
General
