Kyocera TASKALFA FS-1100 User Manual

Job Accounting
OPERATION GUIDE 6-9
6
Making copies in Job Accounting Mode
When Job Accounting is being carried out "= = =" will be displayed in the No. of Copies display and copy
operations can be carried out by entering the assigned Department ID Codes using the numeric keys.
IMPORTANT: Always remember to press the Logout key after completing copying.
1 Confirm the ID code to be deleted and then press
the OK key.
"1" will be displayed on the No. of Copies display.
NOTE: When an error has been made in input, press
[Stop/Clear] and input the data again.
When the Department ID Code that is input does not
match any of the Department ID Codes registered,
Illegal Account. is displayed and the copier
returns to the "= = =" display. Input the correct
Department ID Code.
2 Carry out regular copy operations.
3 Press the Logout key after completing copying.
"= = =" will be displayed on the No. of Copies
display.

Kyocera TASKALFA FS-1100 Specifications

General

Technology	Laser
Maximum resolution	1200 x 1200 DPI
Standard output capacity	250 sheets
Duplex Printing	Yes
Paper size (tray 1)	A4
Print media types	Plain paper, Recycled paper
Standard interfaces	USB 2.0
Product colour	White
Functions	Print
Copy Resolution	600 x 600 dpi
Scan Resolution	600 x 600 dpi
Operating System Compatibility	Windows