51
Export Data File
Exported files will include all data as shown in Fig. 6-12.
1. Insert Flash Drive into USB connection below the display and wait for
recognition. Upon recognition, a pop-up will display. Touch [OK].
2. From the Data Log Screen, highlight the log to export by touching the log name.
3. Touch [Export].
4. Select the file format (.CSV or .PDF), then touch [OK].
5. Once the export is complete, the USB can be removed.
Touching and holding a file name for 3 seconds enables multiple file selection.
Multiple data logs can then be selected and exported at the same time. During
multiple selection mode, the option to Select All will be available at the top of the
Data Log Screen.
Delete Data File
1. From the Data Log Screen highlight the Log to delete by touching the Log
name.
2. Touching and holding a file name will allow you to select multiple files.
3. Touch [Delete]. After deletion a pop-up will confirm number of deleted files.
Locked Log Files will not be deleted.
Figure 6-12
Labconco Corporation
Program: Intense
FlaskScrubber Vantage Series Glassware Washer
Date Time
Elapsed
Time
Time
Remaining Segment Step
Step
Code Temp (° C) Alert
8/6/2020 7:32:02 PM 0:00:01 3:05:00 Wash Drain 4 47
8/6/2020 7:32:12 PM 0:00:11 3:05:00 Wash Drain 4 47
8/6/2020 7:32:22 PM 0:00:21 3:05:00 Wash Drain 4 46
8/6/2020 7:32:32 PM 0:00:31 3:05:00 Wash Drain 4 46
8/6/2020 7:32:42 PM 0:00:41 3:05:00 Wash Drain 4 46
8/6/2020 7:32:52 PM 0:00:51 3:05:00 Wash Drain 4 46
8/6/2020 7:33:02 PM 0:01:01 3:04:00 Wash Drain 4 46
8/6/2020 7:33:12 PM 0:01:11 3:04:00 Wash Hot Fill 2 46 PP
To Next Page
Loading...
Need help?
General
