Labconco FlaskScrubber 4121010 Series User Manual

56
Time & Date
Reference Fig. 6-18. Use the Time and Date screen to choose Clock Format (12 or 24
hour), and then either manually Set the Time and Date, or enable Auto Update, which (if
washer is connected to a valid Ethernet port) will auto update the time and date. With
Auto Update the following settings need to be entered:
 Time Zone – Enter the Greenwich Mean Time (GMT) offset value for your
location (integer value between -12 & +12).
 NTP server – Enter the “web address” (URL) of the NTP server (of your choice)
that will provide clock synchronization data to the washer via the Ethernet
connection. A common site is: time.nist.gov
Finally, Daylight Savings (ON/OFF) can be enabled/disabled for areas observing
Daylight Savings Time (DST).
Figure 6-18

Labconco FlaskScrubber 4121010 Series Specifications

General

Brand	Labconco
Model	FlaskScrubber 4121010 Series
Category	Dishwasher
Language	English