240
8 CO/O
2
Control
Assessing CO/O
2
Control Behaviour
NOTICE
Recommendation:
Use the Chart/Trace recording tool to evaluate the control mode
(see chapter Chart/Trace (Recording Tool).
The LAMTEC CO regulation is an adaptive, self-optimising fuel-air composite regulation. The
goal is to implement optimum burner adjustment at or just before the CO edge without manual
intervention.
To prevent CO spikes in extreme systems (burners) that, for example, have a large mechan-
ical hysteresis, you have the option of making the following adjustments using the CMS Re-
mote Software.
Possible optimisations:
– Activate/deactivate CO regulation depending on the firing rate (see Chapter Activating O2
Trim).
– Amount of air increase in the case of a change of firing rate direction (see Chapter Opti-
mising the CO Control).
– Amount of air increase between the CO edge and CO optimisation curve.
Also see chapter Optimising the CO Control.
To Next Page
Loading...
Need help?
General
