10 USER'S MANUAL 554515_A_PUB_DATE_1_FEB_2014.DOC
For washing machines connected to liquid soap supply system.
Check if the liquid soap supply system is in operation and if there is sufficient quantity of liquid soap.
Standard wash programs versus custom made wash programs.
This explanation is only valid for standard wash programs. For custom made programs, it is possible that
other dispensers have been selected. (See „Programming manual“).
Remark
: It is advisable to use only detergents with „reduced foaming“ which can easily be found in retail
shops. The dosage of soap to use is generally mentioned on the packing. An overdose of detergent can
lead to poor wash results and „suds“ overflow which can damage the machine.
Take care that the lid of the soap dispenser is closed when the machine starts.
4.8. START THE WASHER
After selecting the desired wash program number, by pressing the START button the wash cycle will be started.
If you enter a number that does not correspond to any of the available programs, the display shows
the message “INVALID”. During the wash cycle the user can follow the progress of the wash sequence and
the remaining wash cycle time on the display.
WARNING!
IF "CLOSE DOOR" IS DISPLAYED, IT IS NOT POSSIBLE TO START WASHING CYCLE.
CHECK WHETHER:
– THE MACHINE IS IN BASIC POSITION
– THE DRUM DOOR IS CLOSED
!
Wash program
number
Wash program
name
Remaining time
wash program
Units
Progression
bar
35 Min.
Prog 2: WARM WASH
Step 1: WASH
Wash program
step
To Next Page
Loading...
Need help?
General
