Welcome!
Thank you for purchasing our SET-02. We would like to congratulate
you on your acquisition of the Digital plus by Lenz
®
SET-02 and
we hope you will enjoy working with this model-railway control.
The purpose of this operating manual is to explain the use of the Set
and its components to you. In order to proceed as quickly as
possible to the pleasure of operating your model railway with DCC.
Begin by reading the section "First Steps". After you have operated
your first train you will be better able to follow the step by step
description of SET-02's entire range of functions. It is not necessary
to understand or use all the system's features. Select the set of
features you are comfortable with and enjoy your model railroad.
If you still have questions, for which you can not find the answers
even after reading this operating manual, please contact us. We will
be happy to help you. There are four different ways of contacting
Lenz Elektronik GmbH:
Europe North America
Postal
address:
Lenz Elektronik GmbH
Huettenbergstrasse 29
D-35398 Giessen
Lenz Agency
PO Box 143
Chelmsford, MA 01824
Phone ++49 (0) 6403 900 133 ++1 978 250 1494
Fax ++49 (0) 6403 900 155 ++1 978 250 1494
Email info@digital-plus.de support@lenz.com
All present and correct?
Please check, whether all the components of the SET-02 have been
delivered:
LH200 - Knob based Engineer's Throttle
LV200 - Power Station (Booster)
black coil cable with phone plugs at each end
one 4- and one 3-terminal green connector attached to the
rear of the LV200
one additional 4-terminal green connector
operating manual (this booklet)
If any component is missing, please ask your supplier for a
supplementary delivery.
To Next Page
Need help?
General
