Preface and general information
1-2 821XKlimaBA0399
1.3 Legal regulations
Labelling
Nameplate CE mark Manufacturer
Conforms to the EC Low
Voltage Directive
Lenze GmbH & Co KG
Postfach 101352
D-31763 Hameln
Application
as directed
82XX frequency inverter
-
must only be operated under the conditions prescribed in these Instructions.
-
are components
- used for open and closed loop control of variable speed drives withasynchronous standard
motors, reluctance motors, PM-synchronous motors with asynchronous damping cage.
- used for installation into a machine.
- used for assembly together with other components to form a machine.
-
are electric units for the installation into control cabinets or similar enclosed operating housing.
-
comply with the requirements of the Low-Voltage Directive.
-
are not machines for the purpose of the Machinery Directive.
-
are not to be used as domestic appliances, but only for industrial purposes.
Drive systems with 82XX frequency inverters
-
comply with the EMC Directive if they are installed according to the guidelines of CE-typical drive
systems.
-
can be used
- on public and non-public mains.
- in industrial as well as residential and commercial premises.
-
The user is responsible for the compliance of his application with the EC directives.
Any other use shall be deemed inappropriate!
Liability
-
The information, data and notes in these Operating Instructions met the state of the art at the time
of printing. Claims referring to drive systems which have already been supplied cannot be derived
from the information, illustrations, and descriptions given in these Operating Instructions.
-
The specifications, processes, and circuitry described in these Operating Instructions are for
guidance only and must be adapted to your own specific application. Lenze does not take
responsibility for the suitability of the process and circuit proposals.
-
The indications given in these Operating Instructions describe the features of the product without
warranting them.
-
Lenze does not accept any liability for damage and operating interference caused by:
- disregarding these Instructions
- unauthorized modifications to the controller
- operating errors
- improper working on and with the controller
Warranty
-
Warrantyconditions: see Sales and Delivery Conditions of Lenze GmbH&Co KG.
-
Warrantyclaims must be made immediatelyafter detecting defects orfaults.
-
The warranty is void in all cases where liability claims cannot be made.
Disposal
Material recycle dispose
Metal
-
-
Plastic
-
-
Printed-board assemblies -
-
To Next Page
Loading...
Need help?
General
