EasyManuals Logo

LG 32LD330H User Manual

LG 32LD330H
317 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #260 background imageLoading...
Page #260 background image
48
206-4186
This section describes how you can reset a TV that is currently in FTG Mode to Pass-through Mode. Note
that the reset to Pass-through Mode will also restore all factory default settings on the TV.
FTG Mode via CPU
There are three options for resetting Pass-through Mode on TVs that are in FTG Mode via the CPU. The
rst and second options enable you to reset a single TV to Pass-through Mode, while the third option
enables you to reset multiple TVs to Pass-through Mode at one time.
A predened value for Installer Menu item 117 FACT DEFAULT enables access to initiate a factory “IN-
STOP” process that will reset the TV to Pass-through Mode. Contact technical support for the required
value for Installer Menu item 117 and for additional information on performing the IN-STOP from the
Installer Menu.
Using a USB memory device, “Teach” an FMA Conguration le that only contains a “0 Mapped
Channels” FTG Channel Map to the TV. Refer to “Creating an FMA Conguration File using the FTG
Conguration Application” and “Teaching FMA Conguration to a TV” on pages 31 and 32, respectively,
for further information.
If your system uses a Pro:Centric server for conguration, use the Pro:Centric Admin Client to load an
FMA Conguration le that only contains a “0 Mapped Channels” FTG Channel Map on the Pro:Centric
server. Refer to the Pro:Centric™ Server Admin Client User Guide for further information.
FTG Mode via EBL
There are three options for resetting Pass-through Mode on TVs that are in FTG Mode via the EBL. The
rst and second options enable you to reset a single TV to Pass-through Mode, while the third option
enables you to reset multiple TVs to Pass-through Mode at one time.
A predened value for Installer Menu item 117 FACT DEFAULT enables access to initiate a factory “IN-
STOP” process that will reset the TV to Pass-through Mode. Contact technical support for the required
value for Installer Menu item 117 and for additional information on performing the IN-STOP from the
Installer Menu.
Using a direct PC-to-TV connection, “Write” an unpopulated Channel Map—that is, a Channel Map with
zero channels—to the TV. Refer to the “FTG Mode via EBL” procedure on page 35 and/or the Free-To-
Guest (FTG) Configuration Application manual for further information.
If your system uses an FMA for broadcast conguration, congure the FMA device with an FMA Cong-
uration le that only contains a “0 Mapped Channels” FTG Channel Map to broadcast to the TV EBL(s).
Refer to the Free-To-Guest (FTG) Configuration Application manual and/or the Installation & Setup
manual for the FMA device for further information.
Resetting a TV to Pass-through Mode

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the LG 32LD330H and is the answer not in the manual?

LG 32LD330H Specifications

General IconGeneral
EqualizerYes
Audio systemInfinite Surround
RMS rated power20 W
Built-in subwooferNo
Number of speakers2
Equalizer bands quantity5
Product colorBlack
Panel mounting interface200 x 100 mm
Comb filter3D
Display diagonal32 \
Display resolution1366 x 768 pixels
Display technologyLCD
Native aspect ratio16:9
Supported video modes720p
Contrast ratio (dynamic)60000:1
Supported graphics resolutions1366 x 768
Package depth193.04 mm
Package width985.51 mm
Package height619.75 mm
Package weight14650 g
Video formats supportedMPEG2, MPEG4
Number of OSD languages4
On Screen Display (OSD) languagesENG, ESP, FRE, KOR
Placement supportedHorizontal
Number of AV connections1
Mean time between failures (MTBF)60000 h
CertificationRoHS
HDMI version1.3
USB 2.0 ports quantityUSB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
AC input voltage100 - 240 V
AC input frequency50 - 60 Hz
Power consumption (max)150 W
Power consumption (standby)1 W
Power consumption (typical)80 W
Tuner typeAnalog & digital
Analog signal format systemNTSC
Digital signal format systemATSC
Weight and Dimensions IconWeight and Dimensions
Depth (with stand)223.52 mm
Width (with stand)805.18 mm
Height (with stand)581.66 mm
Weight (with stand)12560 g
Depth (without stand)109.21 mm
Height (without stand)528.31 mm
Weight (without stand)11390 g

Related product manuals