To Next Page

To Previous Page

206-4185

Installation and Setup Checklist

__ Unpack TV and all accessories.

__ Install batteries in remote control.

__ Install TV on VESA mount or stand.

Note: It may be advisable to make all cable

connections before installing on VESA mount or

stand, as appropriate.

Hardware Connections

__ Install any additional hardware as

appropriate to your institution, LAN, etc.

Cable Connections

__ Make all connections to rear jack panel and RF

antenna on MPI/PPV card.

__ Make all connections to signal, interactive

resources, and Aux sources, as appropriate.

Commercial Mode Setup

__ Complete Commercial Mode Setup (configure

all relevant Installer Menu items as required of

your institution and configure display features

for the end user).

Software Installation

__ Install or configure any software, as applicable,

for example, PPV, etc.

Setup Checklist / Commercial Mode Setup Overview

Setup Checklist

Commercial Mode Setup Overview

This document describes how to set up LD330H/LD333H Pro:Centric™ TVs for Commercial Mode either

while in Pass-through Mode or Free-To-Guest (FTG) Mode.

Pass-through Mode

This mode allows you to configure a Master TV Setup for cloning purposes as well as external VOD/PPV

control. Use the Installer Remote to congure Installer Menu items as required for TV operation and set up

TV features (Channel, Picture, Audio, etc.). See pages 12 to 13 for detailed information.

FTG Mode

This mode enables Pro:Idiom

decryption and also allows logical channel mapping of physical channels to

remove the need for dash tuning. FTG Conguration Application software is used to congure and/or edit

FTG Channel Map and FTG Installer Menu settings. See pages 29 to 37 for information on FTG Mode

options and using the FTG Conguration Application.

Questions and Answers:

Need help?

Do you have a question about the LG 32LD330H and is the answer not in the manual?

LG 32LD330H Specifications

General

Equalizer	Yes
Audio system	Infinite Surround
RMS rated power	20 W
Built-in subwoofer	No
Number of speakers	2
Equalizer bands quantity	5
Product color	Black
Panel mounting interface	200 x 100 mm
Comb filter	3D
Display diagonal	32 \
Display resolution	1366 x 768 pixels
Display technology	LCD
Native aspect ratio	16:9
Supported video modes	720p
Contrast ratio (dynamic)	60000:1
Supported graphics resolutions	1366 x 768
Package depth	193.04 mm
Package width	985.51 mm
Package height	619.75 mm
Package weight	14650 g
Video formats supported	MPEG2, MPEG4
Number of OSD languages	4
On Screen Display (OSD) languages	ENG, ESP, FRE, KOR
Placement supported	Horizontal
Number of AV connections	1
Mean time between failures (MTBF)	60000 h
Certification	RoHS
HDMI version	1.3
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (max)	150 W
Power consumption (standby)	1 W
Power consumption (typical)	80 W
Tuner type	Analog & digital
Analog signal format system	NTSC
Digital signal format system	ATSC

Weight and Dimensions