Logik L32DIGB20 User Manual

GB-18
Preparation Connections Initial Setup Using the Features Hints and Tips, Specification
and Safety Warnings
Using the Features
via USB port
Selecting the Input Source
1. Press the SOURCE button to display the input source list.
2. Press the
buttons to select the input source that you want:
TV / AV / S-VIDEO / SCART1 /SCART2 / YPBPR / VGA / HDMI1 /
HDMI2 / HDMI3 / MEDIA.
3. Press the OK button to confirm your selection.
HDMI3
Channel Selection
• Press the CH / buttons repeatedly or the 0-9 buttons to select the channel.
Alternative
In TV mode, press the OK button to enter the Channel List. Then use
the
buttons to highlight and select the channel. Press the OK
button to view the selected channel.
If a blocked channel is selected, the Channel Locked! message will pop
up. Press the OK button on the remote control to display the password
screen. Press the 0-9 buttons to enter the password, the channel will
then be unlocked (refer to page 39 for details on Channel Block).
• Press the FAV button repeatedly to select the favourite channel if you have previously preset your favourite channels.
Alternative
Press the FAV button to view the Favourite List. Then use the
buttons to highlight and select the channel. Press the OK button to
view the selected channel.
• Press the
button to return to the previously viewed channel.
Volume Adjustment
• Press the VOL +/– buttons to adjust the volume.
• If you wish to switch the sound off, press the
button, press the button again or the VOL +/– buttons to resume audio
listening.
L32DIGB20_IB_final110325_running change_PN not updated.indd 18 25/03/2011 7:11 PM

Logik L32DIGB20 Specifications

General

Brand	Logik
Model	L32DIGB20
Category	LCD TV
Language	English