GB-39
PreparationConnectionsInitial SetupUsing the FeaturesHints and Tips, Specification
and Safety Warnings
Using the Features
via USB port
Customising the Parental
Parental Mode
Allows you to set Hotel Block / Channel Block / Program Block / Input Block / Change Password / Clean All function.
1. Press the MENU button and then use the
buttons to select the Parental
menu and then press the
button.
2. Use the 0–9 buttons to input a 4-digit password.
The default password is “0000”.
If you change the password, be sure to remember the new password!
If you forget your password, press the master password “8899” on the
remote control.
3. Press the buttons to select Hotel Block and then press the button.
4. Press the
buttons to off/on Hotel Lock function.
Hotel Lock
Press the
buttons to select On to open the Hotel
Lock function, TV mode will mute. Parental mode
setting will be effective.
Press the
buttons to select Off to close the Hotel
Lock function, TV Mode will restore Parental Mode
setting will be invalidated.
On Source
Press the
buttons to select the default Input Source
mode: TV / AV / SVIDEO / SCART1 / SCART2 / YPBPR /
VGA / HDMI1 / HDMI2 / HDMI3.
On Channel
Press the
button than select the default channel.
Keyboard Lock
Press the
buttons to select keyboard lock off or on.
Max Volume
Press the
buttons to select the maximum volume.
5. Press the MENU button to save the setting and return back to the previous
menu.
6. Press the EXIT button to exit the menu.
Channel Block
1. Press the buttons to select the Channel Block and then press the
button.
2. Press the
buttons to select channel to highlight and then press the OK
button on the remote control to lock the channel.
3. Press the OK button again to unblock it.
4. Press the MENU button to save the settings and return back to the previous
menu.
5. Press the EXIT button to exit the menu.
Password
Hotel Block
100
Password
Password
L32DIGB20_IB_final110325_running change_PN not updated.indd 39 25/03/2011 7:12 PM
To Next Page
Loading...
Need help?
General
