Logik L32DIGB20 User Manual

GB-24
Preparation Connections Initial Setup Using the Features Hints and Tips, Specification
and Safety Warnings
Using the Features
via USB port
4. Press the buttons to select Digital Channel Range Scan / Analogue
Manual Scan / Single RF Scan and then press the
button.
Analogue Channel Fine Tune
3. Press the buttons to select Manual Scan and then press the button.
5. Select From Channel / Start Frequency / RF Channel to start to Channel Scan.
Digital Channel
Range Scan
Press the
buttons to select.
Press the
buttons to select the beginning channel
number.
Press the
buttons to select the ending channel
number.
Press the OK button to confirm and start scanning.
Press the EXIT button to cancel.
Analogue Manual
Scan
Press the
buttons to select.
Start frequency, press 0-9 on current ATV channel
frequency, then press the
buttons to select Scan Up or
Scan Down, then press the OK button to scan.
Press the EXIT button to cancel.
(MHz)
Analogue Manual Scan
Single RF Scan
Press the
buttons to select the current DTV channel
number and then press the OK button to scan.
Press the EXIT button to cancel.
6. When the scan is complete the TV will return to normal TV viewing.
L32DIGB20_IB_final110325_running change_PN not updated.indd 24 25/03/2011 7:11 PM

Logik L32DIGB20 Specifications

General

Brand	Logik
Model	L32DIGB20
Category	LCD TV
Language	English