Logik L32DIGB20 User Manual

GB-45
PreparationConnectionsInitial SetupUsing the FeaturesHints and Tips, Specification
and Safety Warnings
Using the Features
via USB port
The audio function does not work.
Picture OK but no sound
• Press the VOL + / – buttons.
• Sound muted? Press the
button.
• Try another channel. The problem may be caused by the broadcaster.
No output from one of the speakers • Adjust the Balance settings in the Audio menu.
Unusual sound from Inside the TV
• A change in ambient humidity or temperature may result in an unusual noise when
the TV is switched on or off and does not indicate a fault with the TV.
No sound when connecting HDMI • Check if the input source is HDMI.
Audio noise • Keep the RF coaxial cable away from the other connected cables.
Password
Lost password
• Select the Password setting in the Parental menu, then enter the following master
password “8899”. The master password clears your previous password and allows
you to enter a new password.
There is a problem in VGA mode.
The signal is out of range (Invalid
format)
• Adjust resolution, horizontal frequency, or vertical frequency.
Vertical bar or stripe on background
& Horizontal Noise & Incorrect
position
• Use Auto configure or adjust clock, phase, or H/V position.
Screen colour is unstable or single
colour
• Check the signal cable.
• Reinstall the PC video card.
FAQs (Frequently Asked Questions)
Why have I lost some/all of my
channels?
• It happens sometimes, if you have a weak signal. Usually it just means you’ll need
to rescan your digital box or TV. Don’t worry, it easy to do. And once you’ve done it,
you should get all the Freeview channels available to you. If problems persist you
may need to get your aerial checked. Talk to your retailer or contact your local aerial
installer.
Why do I get ‘blocking’ on my digital
picture?
• In most cases, blocking is caused by a reception problem - either the signal is too
weak or there is some kind of interference. Talk to your retailer or contact your local
aerial installer
• Blocking can also be caused by a digital signal that is too strong. If you are still
experiencing blocking and the signal is strong, consult your local aerial installer for
advice.
Can I watch Freeview using a
portable set-top aerial?
• Some, but only a few, homes may be able to use a set top aerial. However, for a
much better reception, we strongly recommend that you use a rooftop aerial.
• If you do not have access to a rooftop aerial - for example, if you rent a flat and the
aerial is the responsibility of your landlord, or if you’re using a second TV in the
bedroom and don’t want the hassle and expense of using extension cables — a set-
top aerial may be your only option.
What type of aerial do I need?
• If you are installing a new aerial, we recommend a wideband rooftop aerial rather
than a loft aerial. Loft aerials generally receive a weaker digital signal and are more
likely to get interference from other electrical devices in the home. We suggest you
have an aerial survey done before getting an aerial upgrade.
• Talk to your retailer or contact your local aerial installer.
L32DIGB20_IB_final110325_running change_PN not updated.indd 45 25/03/2011 7:12 PM

Logik L32DIGB20 Specifications

General

Brand	Logik
Model	L32DIGB20
Category	LCD TV
Language	English