LS tractor MT2 Series User Manual

5 -15
5-3. Lubricants and Capacity
Lubricants Capacity International standard
Recommended
products
Engine coolant 3.3L (0.9U.S.gals) ASTM D6210
Soft water (50%) +
Anti-freeze (50%)
Fuel 25L (6.6U.S.gals)
ASTM D975 No.2 or
EN 590
Ultra low sulfur diesel
Engine oil 2.9L (0.8U.S.gals) API CF-4 or CI-4
KIXX DL
(Maker : GS Caltex)
Transmission oil
(common use for
hydraulic lift and
steering system)
17L (4.5U.S.gals)
API GL4
ISO VG 32/46
LSTH400G
(Maker : GS Caltex)
Front axle oil 3.0L (0.8U.S.gals)
API GL4
SAE 80W
EPK 80W90
(Maker : S-OIL TOTAL
co. Ltd.)
Grease
(Front axle holder,
3-point linkage, etc)
Proper amount NLGI 2
MAHWAK Multi
purpose or MAHWAK
All purpose (Caltex)
Ambient
Temperature
℃(℉)
Oil
Viscosity
-30
(-22)
-25
(-13)
-20
(-4)
-15
(5)
-10
(14)
-5
(23)
0
(32)
10
(50)
20
(68)
30
(86)
40
(104)
SAE 10W-30
SAE 15W-40
SAE 5W-20
RECOMMENDED ENGINE OIL VISCOSITIES
The correct engine oil viscosity grade is dependent upon ambient temperature. Refer to the below chart
when selecting engine oil for your tractor.
In areas where prolonged periods of extreme temperatures are encountered, local lubricant practices
are acceptable; such as the use of SAE 5W 30 in extreme low temperatures or SAE 50 in extreme high
temperatures.

LS tractor MT2 Series Specifications

General

Brand	LS tractor
Model	MT2 Series
Category	Tractor
Language	English