LS tractor MT2 Series User Manual

5 -17
 Before starting engine, check the followings carefully to avoid any failure or damage.
5-5. Checking before Starting (Daily check)
Battery
charging
status
Amount of
engine oil
Brake
operation
Tire
air pressure
and damage
Wheel bolts and
tightening of
each part
Amount of
transmission oil
Contaminant
in fuel filter
Amount of
coolant
Operation of
indicators
Fuel
amount
Damage of headlights,
turn signal lights,
and horn
(1) Engine oil

Oil specification and capacity :
See chapter 5-3, “Lubricants and Capacity” or
the last page in this manual.

Checking engine oil level
- Check the engine oil level before starting
engine or at 5 minutes later after stopping
engine.
- Check if the oil level is between MAX and MIN
marks of the oil gauge. If necessary, add new oil.
- It must only be checked while the engine is
stopped.
- If your engine is operated in dusty/dirty
condition, the service interval must be shorter
than normal condition.
- Must replace the engine oil and engine oil filter
after the first 50 hours of use.
Engine oil gauge
Engine oil gauge

LS tractor MT2 Series Specifications

General

Brand	LS tractor
Model	MT2 Series
Category	Tractor
Language	English