LS tractor MT2 Series User Manual

5 -16
 After using first 50 hours, contact your authorized local dealer for maintenance if possible.
- Replace engine oil and engine oil filter. (⇒ Refer to Every 250 hour check. See page 5-29)
- Replace hydraulic and HST oil filter. (⇒ Refer to Every 250 hour check. See page 5-30)
- Check transmission / rear axle / hydraulics oil level
- Check front axle oil level
- Check and adjust parking brake
- Check torque of exhaust manifold bolts
- Check and adjust V-belts and tension. (⇒ Refer to Every 250 hour check. See page 5-31)
- Tighten all cooling system hose connections
- Check torque of safety cab or frame mounting bolts
- Check torque of front end weight clamp bolts (if fitted)
- Check torque of wheel bolts and nuts
- Check tire pressures and condition
- Clean radiator, oil cooler and A/C condenser cores (if fitted)
- Check radiator coolant level and specific gravity
- Check clutch pedal free play (Mechanical synchro-shuttle models)
- Check brake adjustment and pedal equalization
- Lubricate all grease fittings
- Neutral start switches operative
5-4. First 50 hour check

LS tractor MT2 Series Specifications

General

Brand	LS tractor
Model	MT2 Series
Category	Tractor
Language	English