EasyManuals Logo
Home>LS tractor>Tractor>MT2 Series

LS tractor MT2 Series User Manual

LS tractor MT2 Series
187 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #52 background imageLoading...
Page #52 background image
2 -4
(4) Steering tilt pedal
Press down the steering tilt pedal to release the
steering column and tilt the steering wheel to the
desired position.
Release the pedal to lock the steering column in
place, and check to make sure column does not
move forward and backward.
You must operate the steering tilt pedal only
when the tractor has stopped completely.
DO NOT adjust the steering column while driving. It may cause a serious accident.
Warning
Steering tilt pedal
Unlock
(5) Seat belt
Always wear the seat belt before operating the
tractor and adjust the belt to fit the operator.
1. Insert the seat belt end into the buckle until a
‘click’ indicates it is properly engaged.
2. To remove the seat belt from the buckle,
press the red release button on the buckle.
Check the seat belt regularly. If damaged or
frayed, replace it with a new one.
Warning
If not wearing the seat belt, it may cause serious injury in case of accident.
During operation, it must be required to wear seat belt with a cab or safety frame
installed. After wearing the seat belt, adjust the belt to fit the operator.
If the roll-bar is folded down or removed, do not wear the seat belt.
Buckle
Seat belt

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the LS tractor MT2 Series and is the answer not in the manual?

LS tractor MT2 Series Specifications

General IconGeneral
BrandLS tractor
ModelMT2 Series
CategoryTractor
LanguageEnglish

Related product manuals