2 -5
2-2. Safety Device
(1) Hood (Bonnet)
z Hood is a protection device to prevent an
unintended access to the rotating parts around
engine ; cooling fan, fan belt and rotating shaft
and pulley.
z Do not remove and modify the hood.
(2) Fender
z Fender is a protection device to prevent an
unintended access to the rear tires and to
prevent mud from irrupting to the driver.
z Do not remove and modify the fender.
Hood (Bonnet)
Fender
PTO shaft
protection cap
PTO safety cover
Warning
▶If you contact the rotating shaft, it may cause a severe injury.
- DO NOT touch shaft which is rotating.
- DO NOT remove the safety cover.
- Avoid loose clothes that can easily be rolled up in the revolving shaft.
(3) PTO safety cover and protection cap
z PTO safety cover is a protection device to
prevent an unintended access to the PTO shaft
and to prevent an accident causing by the
rotating drive shaft.
z Do not remove the PTO safety cover. If the PTO
safety cover or protection cap is damaged or
removed, replace it with a genuine part.
z Do not step on the PTO safety cover.
z After using the PTO shaft, apply grease and
insert the PTO shaft protection cap.
To Next Page
Loading...
Need help?
General
