4 -1
Caution
▶Check each part before starting
engine.
▶Check if there is some other
people around before starting.
▶Place all the levers and switches in
NEUTRAL or OFF position.
4. Operation and Work
4-1. Engine start and stop
Key switch
Shuttle lever
PTO switch
Throttle lever
Clutch pedal
Brake pedals
Parking brake
1. Sit in driver’s
seat and apply
parking brake
2. Place main gear shift, range gear
shift lever, shuttle lever in NEUTRAL
and PTO switch in OFF position.
3. Push throttle lever to
the middle position of
the full throttle.
5. Wait until the cold start
aid indicator is OFF.
(about 10 seconds)
6. Depress clutch pedal
fully and turn key switch
to START position. As
soon as the engine
starts, release the key
switch to ON position.
8. Run engine for a few
minutes to allow engine oil
and transmission oil to
warm up.
Mechanical type
4. Turn key switch to ON
and check if the battery
charging indicator and
cold start aid indicator
are ON.
7. Check if the battery
charging indicator and
engine oil pressure
indicator are OFF.
If not, stop the engine
immediately and check the
problem.
(1) Engine start
To Next Page
Loading...
Need help?
General
