M
AVTMTTR100-ENG Rev 6 Nov 2015
66
Custom Configurations
Up to 100 custom transformer configurations, test plans, can be stored in the
TTR100. The CUSTOM CONFIGS. screen is accessed by selecting 4, CUSTOM
CONFIGS., on the Main Menu. The number of stored configurations is indicated
on the Main Menu. Refer to Figure 6-9 for the CUSTOM CONFIGS. screen.
Figure 6-9. Custom Configs. Screen
To select a specific configuration, select 1, SELECT CONFIG. Numerous
screens with the stored configurations may be available. The configurations are
stored in ascending order of IDs. Scroll through the screens by using the left &
right scroll keys until the desired configuration appears. To select the
configuration, choose the associated number and press the ENTER key. All
saved transformer information will be displayed on FULL TEST screen(s).
To delete a specific configuration, select 2, DELETE CONFIG. Numerous
screens listing stored configurations may be available. Scroll through the screens
by using the left & right scroll keys until the desired configuration appears. To
delete a configuration, choose the associated number and press the ENTER key.
The TTR100 will ask if the selected configuration is to be deleted? Enter 0 for
NO, and 1 for YES.
NOTES:
CUSTOM CONFIGURATIONS can be saved when conducting a FULL TEST on
devices.
If transformer ID number and transformer configuration exceeds 18 characters,
the transformer configuration is NOT displayed on the CUSTOM
CONFIGURATION screen. Only the transformer ID will be displayed.
CUSTOM CONFIGS.
1. SELECT CONFIG.
2. DELETE CONFIG.
3. PREVIOUS MENU
SELECT FROM KEYPAD
To Next Page
Loading...
Need help?
General
