160
Controls in detail
Automatic transmission
Gear ranges
With the gear selector lever in position D
and driving in the automatic shift
program C or S (
컄 page 161), you can
select a gear range for the automatic
transmission to operate within:
Gear selector lever (
컄 page 162):
You can limit the gear range by pressing
the gear selector lever to the left (D-), and
reverse the gear range limit by pressing
the gear selector lever to the right (D+).
Steering wheel gearshift control
(
컄 page 163):
You can limit the gear range by pressing
the respective downshift button on the
steering wheel gearshift control, and
reverse the gear range limit by pressing
the respective upshift button on the
steering wheel gearshift control.
The selected gear range appears in the
multifunction display (
컄 page 156). If you
press on the accelerator when the engine
has reached its rpm limit, the transmission
will upshift beyond any gear range limit
selected.
Effect
é The transmission shifts through
fourth gear only.
è The transmission shifts through
third gear only.
With this selection you can use
the braking effect of the engine.
Effect
ç The transmission shifts through
second gear only.
Allows the use of engine’s
braking power when driving:
앫 on steep downgrades
앫 in mountainous regions
앫 under extreme operating
conditions
æ The transmission operates in
first gear only.
For maximum use of engine’s
braking effect on very steep or
lengthy downgrades.
To Next Page
Loading...
Need help?
General
