252
Controls in detail
Loading
Installing the ski sack
Install the ski sack in the reverse order.
왘 Push ski sack frame 2 with ski sack
inward until the ski sack frame snaps
into place.
왘 Close flap 3.
왘 Close trunk lid.
Split rear bench seat
To expand the cargo area, you can fold
down the left and right rear seat backrests.
The two sections can be folded down
separately.
Folding the backrest forward
The release handle 1 is located in the
trunk.
왘 Pull release handle 1.
왘 Fully retract and fold rearward head
restraints (
컄 page 108).
Warning! G
Never drive vehicle with trunk open while
the ski sack is removed. Deadly carbon
monoxide (CO) gases may enter vehicle in-
terior, resulting in unconsciousness and
death.
i
To prevent unauthorized persons from
accessing the trunk, always close the
flap.
Warning! G
When expanding the luggage area, always
fold the seat cushions fully forward.
Unless you are transporting cargo, the
backrests must remain properly locked in
the upright position.
In an accident, during hard braking or
sudden maneuvers, loose items will be
thrown around inside the vehicle, and cause
injury to vehicle occupants unless the items
are securely fastened in the vehicle.
Always use the cargo tie down rings*
(
컄 page 255).
To Next Page
Loading...
Need help?
General
