400
Practical hints
Replacing bulbs
Front turn signal lamp bulb
왘 Turn bulb socket 3 with the bulb
counterclockwise and remove it.
왘 Press gently onto the bulb and turn it
counterclockwise out of bulb
socket 3.
왘 Press new bulb gently into bulb
socket 3 and turn clockwise until it
engages.
왘 Place bulb socket 3 back into the
lamp and turn it clockwise.
Parking and standing lamp bulb
왘 Press the clamp on housing cover 2
and remove it.
왘 Pull out bulb socket 5 with the bulb.
왘 Pull the bulb out of bulb socket 5.
왘 Press the new bulb into bulb socket 5.
왘 Press bulb socket 5 back into the
lamp.
왘 Align housing cover 2 and press until
it engages.
Additional turn signal lamp bulbs
The additional turn signal lamps in the
exterior rear view mirrors have LEDs.
If a malfunction occurs or LEDs fail to func-
tion, the entire turn signal unit must be re-
placed. Have the turn signal unit replaced
by an authorized Mercedes-Benz Center.
Front side marker lamp bulbs
Since replacing the side marker lamp bulbs
is a technically highly demanding process,
we recommend you have the side marker
lamp bulbs replaced by an authorized
Mercedes-Benz Center.
Replacing bulbs for rear lamps
Before you start to replace a bulb for a rear
lamp, do the following first:
왘 Turn the exterior lamp switch to
position M (
컄 page 114).
왘 Open the trunk (컄 page 99).
Tail lamp unit
1 Latch
To Next Page
Loading...
Need help?
General
