54
Getting started
Parking and locking
You have now completed your first drive.
You have properly stopped and parked
your vehicle. End your drive as follows.
Parking brake
1 Release handle
2 Parking brake pedal
왘 Step firmly on parking brake pedal 2.
When the engine is running, the brake
warning lamp ; (USA only)
or 3 (Canada only) in the
instrument cluster comes on.
Warning! G
With the engine not running, there is no
power assistance for the brake and steering
system. In this case, it is important to keep
in mind that a considerably higher degree of
effort is necessary to brake and steer the
vehicle.
Warning! G
Do not park this vehicle in areas where com-
bustible materials such as grass, hay or
leaves can come into contact with the hot
exhaust system, as these materials could be
ignited and cause a vehicle fire.
To reduce the risk of personal injury as a re-
sult of vehicle movement, before turning off
the engine and leaving the vehicle always:
앫 Keep right foot on brake pedal.
앫 Firmly depress parking brake pedal.
앫 Move the gear selector lever to
position P.
앫 Slowly release brake pedal.
앫 When parked on an incline, turn front
wheels towards the road curb.
앫 Turn the SmartKey in the starter switch
to position 0 and remove the SmartKey
from the starter switch.
앫 Take the SmartKey and lock the vehicle
when leaving.
To Next Page
Loading...
Need help?
General
