More user manuals on ManualsBase.com
COMAND telephone
154
Switching telephone on or off
X
Switching on: Insert mobile phone into
cradle when COMAND is switched on.
or
X
Switch on the mobile phone (see mobile
phone operating instructions).
X
Switching off: Select Telephone £
Telephone £ Telephone OFF.
or
X
Switch off mobile phone (see mobile phone
operating instructions).
Activating telephone mode
X
Select Telephone £ Telephone.
or
X
Press s on telephone keypad.
or
X
Press the N shortcut button once or
twice.
i
The number of times you have to press
the N shortcut button depends on the
operating mode currently selected.
Telephone keypad
1
Telephone keypad
2
Folding cover
With the telephone keypad you can:
R
Enter and clear numbers and special
characters.
R
Reject, accept, connect and end calls.
X
Entering characters: Select Telephone.
X
Fold up cover 2.
X
Enter characters using the A - #
buttons.
i
You can enter the * character by pressing
> once. Pressing this button again
within 1.5 seconds enters the + character.
X
Deleting individual characters: Press
*.
X
Deleting an entire word or number:
Press and hold * until the word or
number is deleted.
“911” emergency call
i
The “911” emergency call system is a
public service. Using it without due cause
is a criminal offense.
i
This function places a call to the local
“911” provider. It does not initiate a Tele
Aid call.
The following conditions must be fulfilled in
order to make a “911” emergency call:
R
The phone is switched on.
R
A mobile network is available.
R
There is a valid SIM card in the phone (not
necessary in all mobile networks).
i
If no SIM card is inserted in the mobile
phone, you can only initiate a “911”
emergency call by using COMAND and the
mobile phone.
Control systems
To Next Page
Loading...
Need help?
General
