%
64 colours are available.
Activating the brightness for zones
#
Select Settings.
#
Select Brightness zones.
#
Activate or deactivate the function.
The Emphasis, Ambient and Vents zones can
be se
t separately.
%
Fewer zones may be available depending on
t
he vehicle equipment.
Activating multi-coloured lighting
#
Select Settings.
#
Select Multi-colour.
#
Activate or deactivate the function.
Ther
e are ten preset colour combinations
available.
Activating multi-coloured animation
#
Select Multi-colour animat..
#
Activate or deactivate the function.
The c
hosen colour combination changes in a
predefined rhythm.
Activating welcome lighting
#
Select Welcome.
#
Activate or deactivate the function.
When t
he vehicle is unlocked, a special inte‐
rior lighting sequence runs.
Activating dependency on air conditioning
se
ttings
#
Select Climate.
#
Activate or deactivate the function.
If c
hanges are made to the temperature set‐
ting in the vehicle, the colour of the ambient
lighting changes briefly.
Switching the inner switch-off delay time
on/of
f
Multimedia system:
,
©
.
Settings
.
Lights
.
Interior
light shut-off
#
Switch the switch-off delay time on or off.
Changing bulbs (only for vehicles with halo‐
g
en headlamps)
Notes on changing bulbs
&
WARNING Risk of bur
ns from hot com‐
ponent parts whilst replacing a bulb
Bulbs, lamps and plugs can become very hot
dur
ing operation.
When replacing a bulb, you could burn your‐
self on these component parts.
#
Allow the component parts to cool
do
wn before replacing the bulb.
R
Do no
t use a bulb if it has been dropped or if
its glass has been scratched. The bulb may
otherwise explode.
R
Do not touch the glass bulb with your bare
hands.
R
Protect bulbs from moisture and do not allow
bulbs to come into contact with liquids.
Light and sight
125
To Next Page
Loading...
Need help?
General
