#
To fold in or out: briefly press button 2.
#
To set: press button 1 or 3 to select the
outside mirror to be adjusted.
#
Press button 4 to adjust the position of the
mirror glass.
%
If the battery has been disconnected or com‐
pletely discharged, you will have to reset the
outside mirrors. Only then will the automatic
mirror folding function work properly.
#
To adjust: briefly press button 2.
An outside mirror that has been pushed out of
position can be engaged in position again as fol‐
lows:
#
Vehicles without electrically folding out‐
side mirrors: Manually move the outside
mirror into the correct position.
#
Vehicles with electrically folding outside
mirrors: Press and hold button 2.
You will hear a click and the mirror will audi‐
bly click into place. The outside mirror will
now be set to the correct position.
Automatic anti-glare mirrors function
&
WARNING Risk of acid burns and poi‐
soning due to the anti-glare mirror elec‐
trolyte
Electrolyte may escape if the glass in an
automatic anti-glare mirror breaks.
The electrolyte is hazardous to health and
causes irritation. It must not come into con‐
tact with your skin, eyes, respiratory organs
or clothing or be swallowed.
#
If you come into contact with electro‐
lyte, observe the following:
R
Immediately rinse the electrolyte
from your skin with water and seek
medical attention.
R
If electrolyte comes into contact
with your eyes, immediately rinse
them thoroughly with clean water
and seek medical attention.
R
If the electrolyte is swallowed,
immediately rinse your mouth out
thoroughly. Do not induce vomiting.
Seek medical attention immediately.
R
Immediately change out of clothing
which has been contaminated with
electrolyte.
R
If an allergic reaction occurs, seek
medical attention immediately.
136
Light and visibility
To Next Page
Loading...
Need help?
General
