Folding the seat backrest forwards to enter
the vehicle (vehicles with a third row of
seats)
&
WARNING Risk of injury when folding
the seat backrest on the second row of
seats forwards
If the handle for the seat backrest on the
second row of seats is pulled from the third
row of seats, the seat backrest on the sec‐
ond row of seats will fold forwards and will
not engage. People in the sweep of this seat
backrest can become trapped.
#
When getting out of the third row of
seats, do not hold the seat backrest on
the second row of seats.
Vehicles with EASY-ENTRY function: If a seat
on the second row of seats is located in the
EASY-ENTRY area, this will be shown on the mul‐
tifunction display on the instrument cluster.
#
If necessary, fold the seats on the third row
into position (/ page 112).
#
To fold the seat backrest in the front posi‐
tion: pull handle 1.
The seat backrest will fold forwards.
*
NOTE Damage to the seat backrest han‐
dle caused by pulling
The handle can be damaged if it is used to
pull the seat forwards.
#
Move the seat forwards by the seat
backrest.
#
Move the seat forwards by the seat backrest.
Hold the seat firmly in place while doing so.
#
To fold the seat backrest back into an
upright position: swing the seat backrest
back until it engages.
The seat backrest will remain in the cargo
position.
#
Slide the seat backwards.
The seat will stop in the front position.
#
Move the seat into the desired position
(/ page 93).
#
If necessary, fold in the seats on the third
row (/ page 110).
%
To increase the size of the cargo compart‐
ment, you can move the seat backrests into
the trunk floor position (/ page 107).
96
Seats and stowing
To Next Page
Loading...
Need help?
General
