Windscreen wipers and windscreen washer sys-
t
em
Switching the windscreen wipers on/o
1
g W
indscreen wipers o
2
Ä A
utomatic wiping, normal
3
Ã… A
utomatic wiping, frequent
4
° Continuous wiping, slo
w
5
¯ Continuous wiping, f
ast
#
Turn the combination switch to the corre-
sponding position 1 - 5.
#
Single wipe/washing: push t
he button on the
combination switch in the direction of arrow
1.
R
à Single wipe
R
î Wipes with washer uid
%
Observe the notes on washing the vehicle in a
car w
ash (/ page 434).
Vehicles with MAGIC VISION CONTROL: in posi-
tion 2 or 3 , t
he windscreen washing process
will automatically be triggered if dirt is detected
on the windscreen unless the Top up washer fluid
message is being displayed.
Deep-cleaning the windscreen
In the case of heavy soiling, you can deep-clean
the windscreen above outside temperatures of
5°C.
#
In a stationary vehicle, turn the combination
switc
h to position 1, 2 or 3.
#
Press and hold the button on the combination
switc
h in the direction of arrow 1 for approx-
imately two seconds.
The wiper arms will move into their replace-
ment positions and washer uid will be distrib-
uted on the windscreen.
Aer approximately 30 seconds, the wiper
arms will move back again and wipe the wind-
screen several times. Deep-cleaning will now
have nished.
Replacing the windscreen wiper blades
&
WARNING Risk of becoming tr
apped if the
windscreen wipers are switched on while
wiper blades are being replaced
If the windscreen wipers begin to move while
y
ou are changing the wiper blades, you can be
trapped by the wiper arm.
#
Always switch o t
he windscreen wipers
and vehicle before changing the wiper
blades.
182
Light and sight
To Next Page
Loading...
Need help?
General
