#
Mark the relevant weekdays for which the
depar
ture time will apply and conrm with
a.
or
#
Select ´ and edit e
xisting repeat days.
Setting a break in the charging process
U
p to four breaks in the charging process can be
set during which the vehicle is not charged, even
if it is connected to a charging station.
#
Select Charging interruptions.
#
Select Add new time and t
hen set and save
the times for the beginning and end of the
break.
#
Activate or deactivate the charging breaks that
have been set.
Set charging breaks can be edited with the ´
butt
on or deleted with the E button.
Setting the maximum charge level
#
Select Maximum charge state.
#
Set the desired percentage.
The high-v
oltage battery is charged up to the
set percentage as a maximum.
%
The percentage can be set in increments of
10%.
%
As soon as the full charge level is reached, a
no
tication is shown in the central display
that the charging process is completed and
the journey may be continued.
Calling up the energy ow display
Multimedia system:
4
©
5
Info
#
Select Energy flow.
The ener
gy ow in the vehicle will be dis-
played.
Information on the status of the hybrid system
and t
he current state of charge of the high-voltage
battery will be displayed in addition to the energy
ow.
Navigation and tr
ac
Notes on navigation
Route guidance with augmented reality
&
WARNING Risk of accident and injury as a
result of distraction, incorrect depiction or
wrong interpretation of the display
The camera image of the augmented reality
display is not suitable as a guide for driving.
#
Always keep an eye on the actual tr
ac
situation.
#
Avoid extended observation of the cam-
er
a image.
&
WARNING Risk of accident and injur
y due
to imprecise positioning of additional
information
The additional information from the augmen-
ted reality display may be inaccurate and is
not a substitute for observing and assessing
the actual driving situation.
390
MBUX multimedia system
To Next Page
Loading...
Need help?
General
