mentation of the product: Head of the Technical
Depar
tment Brano a.s.
4.
Hradec nad MoravicÃ
Place
5.
05.10.2020
Date
Engineer Petr Petr
[Signature]
Director of division ZZ
TIREFIT kit
Copy and translation of the original declaration of
conf
ormity:
EC declaration of conformity
In accordance with EC Directive 2006/42/EC
We hereby declare that the product
Product designation: Daimler electric air pump
Model designation: 0872, DT/UW 200077 - IBK-
LK2P
MB par
t no.: A 000 583 9204
complies with the following relevant regulations:
2014/30/EU
Applied harmonised standards, in particular:
DIN EN 55014-1: 2017
DIN EN 55014-2: 2015
Manufacturer: Dunlop Tech GmbH
Address: Oenbacher Landstrasse. 8, 63456
Hanau
Authorised representative: IMS dept.
Date: March 2020
Signature: IMS-AE, IMS-AE-L
Diagnostics connection
The diagnos
tics connection is a technical inter-
face in the vehicle. It is used, for example, during
repair and maintenance work or for reading out
vehicle data in a specialist workshop. Diagnostic
devices should therefore only be connected in a
q
ualied specialist workshop.
&
WARNING Risk of accident due t
o con-
necting devices to the diagnostics con-
nection
If you connect devices to the diagnostics con-
nection of the vehicle, the function of vehicle
systems and operating safety may be
impaired.
#
For safety reasons, we recommend that
you only use and connect products
approved by a Mercedes-Benz service
centre.
&
WARNING Risk of accident due t
o objects
in the driver's footwell
Objects in the driver's footwell may impede
pedal travel or block a depressed pedal.
This jeopardises the operating and road safety
of the vehicle.
38
General notes
To Next Page
Loading...
Need help?
General
