#
Select Dashcam.
#
Select Track Race or Drag Race and activate
Activate recording.
#
You can set which overlay is to be used in the
r
ecorded video under Video overlay contents.
Plug-in hybrid settings
Conguring t
he charging settings
Multimedia system:
4
©
5
Hybrid
5
Charging
Se
tting the charging program
#
Select Home, Work or Standard.
Opening the socket ap
#
Press Open socket flap.
The soc
ket ap opens and can be closed
again by hand.
Unlocking the charging cable (mode 3 or 4)
When t
he function is active, the charging cable is
unlocked when the maximum charge level is
reached.
#
Select Home or Work.
#
Activate or deactivate Unlock charging cable.
Activating or deactivating location-based charging
#
Select Charge at home or Charge at work.
#
Activate or deactivate Select based on loca-
tion.
When the function is activated, the vehicle's cur-
r
ent position is saved as one of the selected
options. When the address is reached again, a
brief query appears as to whether the respective
charging program should be selected.
Activating or deactivating rapid charging
#
Activate or deactivate the Rapid charging
function.
The Rapid charging function incr
eases the maxi-
mum possible charging capacity at charging sta-
tions up to 60 kW in order to charge the vehicle's
high-voltage battery faster. Aer the charging
process is complete, the charging capacity in the
"Standard" charging program is again limited to
20 kW in order to protect the high-voltage battery.
Setting the departure time
The se
t departure times are used for the vehicle's
pre-entry climate control and for predictions
regarding the approximate state of charge and
range at the time selected. When rapid charging is
deactivated, the charging process start time is
optimised for the next departure time. When rapid
charging is activated, the charging process starts
immediately, irrespective of the next departure
time.
#
Select Next departure time.
The following charging times can be selected:
R
individual c
harging times
R
a Week profile
Setting an individual departure time
#
Select Add new timeand se
t the time.
or
#
Select ´ and adap
t an existing departure
time.
Setting the repeat days
#
Select Add new timeand se
t the time.
MBUX multimedia system
389