Power Trim Does Not Operate (Electric Motor Operates but Sterndrive Unit Does Not Move)
Possible Cause Remedy
The trim pump oil level is low. Fill the trim pump with oil.
The drive unit is binding in the gimbal ring. Check for obstruction. See a Mercury Diesel–authorized repair facility.
Power Trim Does Not Operate (Electric Motor Does Not Operate)
Possible Cause Remedy
Blown fuse. Replace the fuse.
Loose or dirty electrical connections or
damaged wiring.
Check all the associated electrical connections and the wires (especially the
battery cables). Clean and tighten the faulty connection. Repair or replace the
wiring.
Section 6 - Troubleshooting
90-8M0145546 eng MAY 2018 Page 97
To Next Page
Loading...
Need help?
General