Instrumentation
VesselView
Your power package may be connected to a SmartCraft VesselView multifunction display. VesselView is a comprehensive boat
information center that can display information for up to four gasoline or diesel engines. It continuously monitors and reports
basic operating data including detailed information such as seawater temperature and depth, trim status, boat speed and
steering angle, and the status of fuel, oil, water, and waste tanks.
VesselView can be fully integrated with a vessel’s global positioning system (GPS) or other NMEA‑compatible devices to
provide up‑to‑the‑minute navigation, speed, and fuel‑to‑destination information.
VesselView Suite
Refer to your VesselView operation manual for detailed instructions on how to operate this display.
SmartCraft Speedometer, Tachometer, and Digital Gauges
The SmartCraft instrument package augments the information provided by VesselView. The instrument package may display:
• Engine RPM
• Boat speed
• Coolant temperature
• Oil pressure
• Battery voltage
• Fuel consumption
• Engine operating hours
SmartCraft tachometer and speedometer
a - Tachometer
b - Speedometer
c - LCD display
The SmartCraft instrument package also aids in identifying the fault codes associated with the engine audio warning system.
The SmartCraft instrument package displays critical engine alarm data and other potential problems on its LCD display.
For basic operation information on the SmartCraft instrument package and for details on the warning functions monitored by the
system, refer to the manual provided with your gauge package.
Section 1 - Getting to Know Your Power Package
90-8M0145546 eng MAY 2018 Page 5
To Next Page
Loading...
Need help?
General