2. Use compressed air to blow out the filter from the inside towards the outside. Do not exceed the air pressure specification.
a - Air filter
b - Compressed air nozzle
Air Filter Cleaning
Maximum air pressure 2.0 bar (29 psi)
IMPORTANT: Do not use petroleum products for cleaning the air filter as the filter element may be damaged.
3. For cleaning the air filter, purchase K&N® filter recharging kit 99‑5050. Follow the procedures contained in the recharging
kit.
Installation
1. Install the air filter onto the intake manifold.
2. Tighten the air filter attaching screw securely.
a - Air filter
b - Screw
c - Intake manifold
Water‑Separating Fuel Filter
!
WARNING
Fuel is flammable and explosive. Ensure that the key switch is off and the lanyard is positioned so that the engine cannot
start. Do not smoke or allow sources of spark or open flame in the area while servicing. Keep the work area well ventilated
and avoid prolonged exposure to vapors. Always check for leaks before attempting to start the engine, and wipe up any
spilled fuel immediately.
Section 4 - Maintenance
90-8M0145546 eng MAY 2018 Page 57
To Next Page
Loading...
Need help?
General