Mercury TDI 3.0L User Manual

14. Quickly install the sealing washer and the fill and drain plug. Tighten the plug to the specified torque.
All Bravo models shown
a - Fill and drain plug
b - Sealing washer
Description Nm lb‑in lb‑ft
Fill and drain plug 6.8 60 —
15.
Install the sterndrive propeller. Refer to Propellers.
16. Check the level of the gear lube monitor after the first use.
IMPORTANT: The gear lube monitor level will change while the product is in use. Always check the gear lube level when the
sterndrive is cool and the engine is not running.
Power Trim Fluid
Checking
IMPORTANT: Check the fluid level with the sterndrive in the full down (in) position only.
1. Place the sterndrive in full down (in) position.
2. Observe the fluid level. The fluid level must be between the "MIN" and "MAX" lines on the reservoir.
a - Reservoir
b - "MIN" and "MAX" lines
3.
Fill as necessary with the specified fluid. Refer to Filling.
a
b
mc79506-1
a
b
14621
a
b
19777
a
b
b
7876
Section 4 - Maintenance
Page 50 90-8M0145546 eng MAY 2018

Mercury TDI 3.0L Specifications

General

Brand	Mercury
Model	TDI 3.0L
Category	Engine
Language	English