Traffic Information
107
3
Traffic Information
TRAFFIC INFORMATION BROADCASTS
On the FM waveband, your radio is able to receive traffic
information broadcasts automatically as and when they occur.
Selecting traffic information
Briefly press the TRAF-RDS control (1) - the traffic jam symbol
illuminates in the display. To switch off the traffic information
feature, briefly press the control again.
Unwanted traffic information broadcasts can be aborted by
pressing the control. In this case, because the feature is being
disabled DURING a traffic information broadcast, disablement is
only temporary - the feature will return as soon as the next traffic
information bulletin is broadcast.
A warning beep will sound if:
• The car leaves the reception area of the traffic information
station being received.
• While listening to a tape or CD the car leaves the reception area
of the traffic information station currently tuned and the
subsequent automatic search cannot find a new traffic
information station.
• The radio is retuned from a traffic information station to a
station that does not broadcast traffic information.
In each case, either switch off the traffic information feature, or
tune to a station that broadcasts traffic information.
Traffic information broadcasts during tape or CD play
When the radio is in traffic information mode, tape or CD play
will be interrupted by traffic information broadcasts automatically
as and when they occur.
Setting the volume for Traffic announcements
The volume of traffic information broadcasts can be set
independently from the volume required for other audio functions
(see ‘TA VOLUME’ in ‘MENU CONTROL FUNCTIONS’,
page 110).
NOTE: The volume for traffic information broadcasts can also be adjusted
by turning the volume control during traffic announcements.
AS0047
TRAF.RDSBND.TS
1234
RPT
5
MIX
D
M
1
To Next Page
Loading...
Need help?
General
