156
Fuse Replacement
MAIN FUSE BOX
To access the interior fuse box, remove the cover by using a small
coin to twist the three turn-buckles 90° anti-clockwise, then
release the cover rearwards.
To replace the cover: locate and align the two hinges at the bottom
of the cover with the slots in the surrounding panel (see top inset),
close the cover and twist the turn-buckles 90° clockwise to secure.
Owners are advised against removing or replacing fuse 27,
which protects the airbag SRS. Suspected failure of the airbag
SRS, should be investigated by an MG Rover dealer.
Checking or renewing a fuse
1. Turn off the starter switch and all electrical equipment before
changing a fuse.
2. Press the removal tweezers (located in the fuse box) onto the
head of the fuse and pull to remove. A blown fuse can be
recognised by a break in the wire.
3. Replace a blown fuse with another of the same, or lower
rating.
If a replacement fuse fails almost immediately, refer the problem to
your dealer.
HB0310a
HB0672
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
To Next Page
Loading...
Need help?
General
