Bonnet Opening
119
4
Bonnet Opening
BONNET OPENING
DO NOT drive with the bonnet retained by the safety catch
alone.
1. From inside the car, pull the bonnet release handle.
2. Move the bonnet safety catch lever to the left.
3. Raise the bonnet and then fit the support stay into the cut-
out in the underside of the bonnet (see inset)
Closing the bonnet
Replace the support stay in its retaining clip, then lower the
bonnet, allowing it to drop for the last 150 mm to its closed
position.
Check that the lock is FULLY engaged by attempting to lift the
front edge of the bonnet. This should be free from all movement.
1 2
3
HB0261a
To Next Page
Loading...
Need help?
General
