MG ZR Series User Manual

Bulb Replacement
163
5
FRONT DIRECTION INDICATORS
Replacement bulb: 21 watt.
Carefully, insert the blade of a small flat-bladed screwdriver into
the gap between the lens and bumper aperture. Position the
screwdriver so that the blade rests between the retaining spring and
the bumper aperture (see illustration). Gentle leverage will
compress the spring sufficiently to enable the light unit to be
withdrawn from the bumper.
Twist the bulb holder a quarter turn anti-clockwise to release it
from the light unit. Push and twist the bulb one eighth of a turn to
release.
When replacing the light unit, insert the outboard side first (the
side nearest the side of the car), then carefully ease the inboard side
of the light into the aperture. Be sure it ‘clicks’ securely into
position.
SIDE REPEATER LIGHTS
Replacement bulb: 5 watt.
Push the lens firmly to the right to withdraw the light unit from
the wing.
Twist to release the bulb holder from the light unit, then pull the
bulb from its socket.
HB0116

MG ZR Series Specifications

General

Brand	MG
Model	ZR Series
Category	Automobile
Language	English