Technical Information
15
4.0 Description of Function
4.1 Door Switch
The door switch, removes power to the appliance when the door is
opened. See figure 4-1.
Figure 4-1: Door Contact Switch (S24)
4.2 Overflow (reed) Switch
The overflow switch is in the lower section of the appliance case.
The float with magnet is located in the drip tray. Should a leak
develop, water flows into the drip tray. The float with magnet then
rises and activates the overflow reed switch which in turn causes
the electronic control to switch the unit off.
Note
When the Service Mode is accessed, the top line of the display
shows the switches that are activated. An “A” will be displayed if
the Overflow Switch is actuated. (i.e. water present in the bottom of
the appliance) Refer to Section 6 for more information on the
Service Mode.
To Next Page
Loading...
Need help?
General
